FİYAT TEMSİLİDİR.LÜTFEN TEKLİF ALINIZ.
Texol Grease™ HSX-AU 2
Fully synthetic grease for low temperature – High Speeds
Texol Grease™ HSX-AU 2 fully synthetic polyalphaolefin base, special lithium thickener and antioxidant, antiwear anticorrosive additives. They are especially designed for the application at low temperatures and for bearings running at high speeds in the normal temperature range. Good compatibility with plastics and elestomers.
Texol Grease™ HSX-AU 2 is specifications according to: VW/AUDI-TL-VW 778 A; BMW – GKM No. 0127 403, 0127 473; DBL – 6827.40; Brose – 002-563501-104 group 3; Opel – B 0040 0060 for HSX-AU 2
Applications and Uses
Door lock cylinders and door locks in vehicle construction
Rolling and sliding bearings, clutch bearings, window lifters, sun roofs, seats, headlamps, fan flaps and Wheel hubs for long-term and lifetime lubrication at low temperatures
Bearings running at high speeds ( n X dm – factor up to 1 mio. ).
Grease-lubricated sliding surfaces at temperature from -60°C to +150°C
Excellent thermal stability
Compatible with elastomers and plastics, used in robots
Good compatibility when coming in contact with EPDM seals or even beer foam enhancing seal life and reduction in down time
Compatible with plastics such as polacetal (e.g. “Delrin”) and polamide (e.g.”Ultramid”)
Compatible with elastomers based on synthetic materials (e.g. NBR,CR) and NR-base as well as with rubber
Working temperature from -60°C up to +150°C
Low coefficients of friction, low temperature rise in the bearing
Resistant to cold and hot water
Do not affect top coat paints e.g. in vehicle construction
High corrosion protection