FİYAT TEMSİLİDİR.LÜTFEN TEKLİF ALINIZ.
Texol Grease™ PTFE Light
Fully synthetic high temperature grease
Texol Grease PTFE Light is a synthetic bearing lubricants. Formulated from an advanced synthetic fluid and thickened with a temperature-stable, non-soap base, Texol Grease PTFE Light is a blend of additives and lubricating solids for exceptional wear protection. Service life and relubrication intervals may be extended. Primarily developed for extended service in oven conveyor bearings, Texol Grease PTFE Light is recommended for applications such as paint drying ovens and textile tenter frames, where minimum application and drip-free performance are needed to promote good housekeeping, and to also minimize maintenance and relubrication.
The components of Texol Grease PTFE Light have especially been selected to optimize the following characteristics:
High-temperature resistance to oxidation, thermal and chemical stability, resistance to organic solvents and most chemicals even at high temperatures, including strong acids, alkalis, and oxidizing agents, excellent lubricating capabilities as shown by Standard laboratory tests, and extensive field evaluations, low volatility at high temperatures and/or high vacuum, formulated to address environmental concerns, Texol Grease PTFE Light is free of lead, chlorinated solvents, and barium.
Applications and Uses
For rolling and sliding bearings with extremely extended relubrication interbals such as in:
film stretching machines
tenter frames for textiles
oven carriages in the ceramics industry
For high-temperature lubrication of rolling and sliding bearings
May be applied manually or via automatic dispensing equipment
Under hostile ambient conditions
Texol Grease PTFE Light is used for relubrication of Texol Grease PTFE and Texol Grease PTFE Heavy
Well suited for the lubrication of armatures and sealing elements.
Pumpable in central lubrication systems
Temperature application range -45 °C to +220 °C ( at higher operating temperatures adequate ventilation must be ensured ) and may intermittently be exposed to temperatures up to +250 °C
Texol Grease PTFE Light is also well suited as an assembly and sealing element for packaging, seals and similar components